O5 Driver Board
- Buy 10 for $520.00 each and save 13%
- Buy 25 for $485.00 each and save 19%
- Buy 50 for $435.00 each and save 28%
- Buy 100 for $400.00 each and save 33%
The O5 OLED driver board for the eMagin SVGA+ and SVGA-3D OLED is an optimal, compact electronic solution for monocular, binocular and stereoscopic applications.
The O5’s mounting tabs can securely fasten the electronics to an enclosure, or can be detached, keeping the entire display engine as small as the display itself, 0.78" x 0.60".
A 14 pin connector inputs VESA VGA/SVGA video, NTSC/PAL monochrome composite video and 5V DC power, and a control interface. The O5 takes care of the rest
including DC/DC power conversion, display initialization, and automatic video resolution and frequency detection (multi-sync). Simply attach the OLED, apply power and your video source, and the display is ready to use. Adjustment of display luminance, signal gain and offset is also featured on the O5 by either wiring a momentary switch to the control pins, or using the O5 serial control interface.
On-board jumpers initialize the most common set-up features:
- NTSC or PAL video
- Image Flip and Rotate
- SVGA+ / SVGA-3D Display Select
Small size and ease of use makes the O5 ideal for both initial evaluation and production systems.
Contact us for quantity pricing or custom firmware and layout requirements.
Serial control interface for further configuration is currently identical to the O4 control protocol. See O4 documentation for further details.
eMagin OLED display is sold separately.
|Microdisplay:||eMagin SVGA+ and SVGA-3D; standard and -XL series|
|Dimensions:||With mounting tabs 19.8mm x 15.2mm (0.78" x 0.90")
Without mounting tabs 19.8mm x 22.8mm (0.78" x 0.60")
|Video Format:||SVGA (800x600) & VGA (640x480) @ 60/72/75/85 Hz NTSC (60 Hz), PAL (50Hz)*|
|Input Voltage:||4.5 to 5.5 VDC, 5 VDC Recommended|
|Power Consumption:||0.25W to 0.35W** total system power, including OLED microdisplay|
Input Cable Pin Assignments (J1)
|1||Composite Video Signal|
|2||Composite Video Ground|
|9||Control Ground reference|
Mating Wire Housing
14-pin 0.8mm Receptacle JST 14SUR-32S
* NTSC and PAL are displayed in monochrome. Only compatible with an SVGA+ type display
** Exact power draw dependent on video mode, image content, and gain/offset values
|Display||eMagin SVGA+, SVGA-3D|
|Form Factor||Same size as display|
|Cable Interface||Discrete Wires|