We know you have dozens of spare USB cables in your desk, but none of them are like this. The Micro B connector end is magnetic, saving your MicroUSB port from the barrage of constant insertions you put it through. Insert once, give the cable a little twist, and the connector stays securely in your port and acts as a dust plug. When it is time to charge, just bring the cable close to the plug and "Click" they automatically connect through the modern marvel of magnetics.
An LED inside the connector indicates when the cable is charging so you always know what's going on.
The cable can handle currents up to 2.5A so your quick charges go really fast.
If you have a Twiddler3, this is a must have accessory!
|Item:||Magnetic USB Calbe|
|Dimension of USB Port:||36.5*15.1*7.3mm|
|Connector core material:||Pure copper core|
|Charging Voltage:||5V/2.0A(Max) Output|
|Raw material:||Nylon braided, alloy USB casing|
|Function:||Data transfer and charging your device|
|Connector plating:||Aluminum casings|
|Shielding:||Foil and braid|
|Conductor:||Bare copper ,Tinned copper or optional|
|Over mold:||PVC 80Pa ,UL94V-0 Black|
|Pre mold:||TPE Jacket|
|Withdraw Force:||10N Min|
|Insertion Force:||35N Max|
|Contact Resistance:||0.01 OHM Max|
|Insulation Resistance:||10M OHM /300V Min|
|Hi-Pot:||DC 300V 10ms|
|Working Temperature:||-25°C~ +85°C|
|Compatibility:||USB 1.0 & USB 2.0|
|Package:||Carton box if sold as standalone|
|Backorder Lead Time||No|