SVGA+ Rev 3 Color OLED-XL

(Note: You must purchase either an O4 or O5 board to drive this display.  O1 only works for Rev. 2 OLED displays.)

 Already the most power-efficient system solution for virtual imaging devices, eMagin microdisplays based on the company’s new OLED-XL™ technology feature significant improvements in luminance, operational lifetime, and reliability.

The new OLED-XL devices typically feature significantly longer (>4x) luminance half life and exhibit at least twice the nominal luminance. The new technology also improves on eMagin microdisplays’ industry-leading power efficiency, depending on the specific OLED-XL product and operating parameters. microdisplays’ industry-leading power efficiency, depending on the specific OLED-XL product and operating parameters.

For the OLED-XL microdisplays, eMagin scientists developed a more efficient OLED structure while maintaining pixel-level efficiency. The results are brighter microdisplays that require no additional power consumption. Typical power consumption of a full color SVGA+ or SVGA 3D OLED-XL display running 60 Hz video at 60 cd/m² is less than 250 mW. No heaters or special modes are required to achieve high quality, instant-on video performance at temperature ranges up to -40°C and +65°C, depending on the product selected.

To enable current customers to upgrade more easily in order to take advantage of new structure’s significantly improved power efficiency, eMagin’s first OLED-XL microdisplays use the same electronic IC design and register settings as its field tested standard SVGA+ and SVGA 3D products.

Proven in military, commercial, and consumer systems, eMagin’s OLED microdisplays have delivered high-resolution, flicker-free virtual images, working effectively even in extreme temperatures and high-vibration conditions that stymie legacy technologies. As with its original OLED microdisplays, eMagin builds its OLED-XL products on silicon chips with internal video control electronics, eliminating the need for additional circuit boards. These new OLED-XL microdisplays extend eMagin’s leadership in this critical virtual imaging technology.

OLED XL Advantages

• Increased power efficiency
• No heaters required
• No clearing at high temperature
• Extended luminance lifetime
• Easy integration into designs based on original OLED microdisplays
• Available in full-color, monochrome white, and monochrome green

eMagin’s OLED-XL technology delivers higher luminance and greater power efficiency, extending OLED’s leadership in this critical requirement for mobile imaging.

Applications

• Night vision/thermal imaging             
• Situation awareness
• Command and control
• Field maintenance and repair
• Instrumentation and test equipment
• Mobile computing systems
• Augmented reality
• Personal entertainment systems

General Operating Characteristics¹

• Formats: SVGA+: 852 (x 3) x 600 pixels | SVGA 3D: 800 (x 3) x 600
• Pixel Aspect Ratio & Pitch: 15 µm squares
• Color Pixel Arrangement: R,G,B vertical stripe | >16.7 million colors
• Viewing Area: SVGA+: 12.78 x 9 mm (0.61 inch diag.) | SVGA 3D: 12 x 9 mm (0.59 inch diag.)
• Display Aspect Ratio: 4:3 or 16:9
• Mechanical Envelope: 19.78 x 15.2  x 5 mm
• Weight: 1.8g
• Color Gamut: >75% of NTSC gamut | Up to 256 gray levels
• Uniformity:>85% (area uniformity as per VESA FPDM Standard)
• Contrast Ratio: >300:1
• Luminance Nominal: 400 cd/m² (color) | 5500 cd/m² (green) | 2000  cd/m² (white)
• Operating Temperatures: SVGA+: -40°C to +65°C (commercial/military) | SVGA 3D: 0°C to +40°C
• Humidity: 85% RH non-condensing

¹ See Datasheetfor actual specifications.

Video Inputs

• R, G, B Inputs: 0 to 0.7V, compatible with VESA VSIS standard
• Video inputs: SMPTE-170 & PAL (monochrome only)
• Video Signal Bandwidth: 56 MHz maximum (VESA SVGA 85 Hz mode)
• Control & Serial Interface: Digital 3.3V CMOS
• Frame Rate: 30 to 85 Hz

Power Interface

• Logic/Analog Supply (Vdd): 3.3V dc @ 50 mA Max.
• OLED Supply (Van): 4.0V dc (4.6V maximum) @ 50 mA Max.
• OLED Return (Vcommon): -3V dc
• Clock recovery: PLL
• Total Power Dissipation:
  Typically <200 [email protected] cd/m2 running movie-like video
  395 mW peak (25°C, 60 Hz, All pixels on)

* Data represent performance at 20°C for standard commercial and industrial operation Characteristics will vary with temperature requirements. Low-cost commercial or consumer operating specifications may vary.

OLED XL vs. SVGA+ Chromaticity Diagram

Besides improving on eMagin's industry-leading power efficiency, our new OLED-XL microdisplays offer a broader color gamut as well.

OLED XL vs. SVGA+ Luminance

Does your application need higher brightness? eMagin's OLED-XL technology delivers significantly higher brightness than its award-winning predecessor without drawing more power.