The SVGA+ active matrix OLED provides a complete integrated analog interface microdisplay solution. With a resolution of 852 x 600 triad pixels, it was dubbed "SVGA+" because it has 52 more display columns than a standard SVGA display. The design permits users to run either (i) standard SVGA (800 x 600 pixels) to interface to the analog output of many portable computers or (ii) 852 x 480, using all the data available from a DVD player in a 16:9 wide screen entertainment format. It is ideal for use in PC monitors, entertainment headsets, and portable DVD players. The integrated circuit accepts dc-coupled R, G, B inputs with separate external vertical and horizontal synchronization inputs, in accordance with the VESA VSIS standard. A fourth analog input is provided for Composite Monochrome, compatible with the SMPTE-170 standard. The microdisplay also includes an on-chip PLL for pixel clock recovery. Selection between the video modes is done through a register set accessible via the on-chip serial interface. The power-up default is a 60Hz zoom mode. The serial interface also provides for user adjustments such as contrast, brightness, PLL parameters, and display orientation. SVGA+ Series OLEDs also have an internal NTSC monochrome video decoder for low power night vision systems. This product is designed to interface with most portable personal computers. Features

• 852 (x 3) x 600 pixels microdisplay
• Color (filtered) or white, green, yellow or custom monochrome
• Highly Integrated Design: clock recovery, serial interface & registers, levels adjustment, drivers and pixel array
• VESA compatible Analog R,G,B inputs
• SMPTE-170M Monochrome video input
• 2-wire serial interface
• 15 x 15 µm color pixel (Stripe)
• 16:9 and 4:3 image aspect ratio
• 15.6 mm (0.61") image diagonal
• Low power consumption: Nominal 200 mW (full motion video)
• Rigid board carrier
• Up to 256 gray shades

Operating Characteristics

• Color Pixel Aspect Ratio: Square
• Color Pixel Pitch: 15 µm
• Color Pixel Arrangement: R, G, B Vertical Stripe
• Viewing Area: 12.78 mm x 9 mm
• Mechanical Envelope: 19.8 mm x 15.2 mm x 5.1 mm
• Color Gamut: > 75% of NTSC gamut
• Gray Levels: 256
• Uniformity: > 85% (Area uniformity as per VESA FPDM Standard)
• Contrast Ratio: > 100:1 Intrinsic (Dark Ambient)
• Front Luminance
  Color: >70 cd/m 2
  White: >270 cd/ m 2
  Yellow: >650 cd/ m 2
  Green: >600 cd/ m 2
• Temperature
  Operating: -35°C to +65°C
  Storage: -55°C to +90°C
• Humidity: 85% RH non-condensing

Video Inputs

• R, G, B Inputs: 0 to 0.7 V, compatible with VESA VSIS standard
• Mono Composite Input: 0 to 1.0V, compatible with SMPTE-170M levels
• Video Signal Bandwidth:
  56 MHz maximum (VESA SVGA 85 Hz mode)
  13 MHz minimum (SMPTE-170M)
• Control & Serial Interface: Digital 3.3V CMOS
• Frame Rate:
  1/Tf = 85 Hz maximum (non-interlaced modes only)
  1/Tf = 40 Hz minimum (SMPTE-170M mode only)

Power Interface

• Logic/Analog Supply (Vdd): 3.3 Volts DC @ 50 mA Max.
• OLED Supply (Van): 4.0 Volts DC (4.5v maximum) @ 50 mA Max.
• OLED Return (Vcommon): -3.0 Volts DC @ 50 mA Max.
• Total Power Dissipation: 395 mW peak (25°C, 60Hz, All pixels on), Typical <200 mW @ 60 cd/m2 running movie -like video